Drop 001 / Now shipping

675SS Tank
Overlay Kit

Black out the badge. Permanent vinyl overlays for the CFMOTO 675SS tank emblem, cut 0.015″ oversize so the stock letters disappear completely.

$10per kit
2 overlays, one per side
Finish Matte Black

Low-sheen and stealthy. A clean blackout with no shine.

Buy Matte Black$10

Secure checkout through PayPal. Pay with PayPal or a card.

  • Permanentoutdoor vinyl
  • UV + rainresistant
  • +0.015″overcut, full coverage
  • ~5 mininstall
A blacked-out 675SS tank emblem covered in rain beads at night
Field test / Colorado weather

Rain beads off.
Sun doesn't fade it.

Cut from permanent outdoor vinyl, not craft-shelf removable stuff. That's my own bike in the photo, after a rainy night parked outside.

The detail

The stock badge is silver.
Now it doesn't have to be.

Each overlay is traced from the factory tank emblem and cut 0.015″ oversize on every edge, so it sits on top and fully hides the silver underneath. No removal, no heat gun, no paint. Pick a finish that matches your tank, or one that contrasts with it.

Blacked-out emblem on a 675SS in full sun
DaylightFactory-style fit on the stock emblem.
2Overlays per kit. Left and right side of the tank.
3Finishes. Matte black, gloss black, gloss white.
An overlay on transfer tape packed in a padded mailer
Ships readyPre-masked on transfer tape in a padded mailer.
Install

Five minutes.
No tools.

  1. 01

    Clean

    Wipe the emblem with isopropyl alcohol and let it dry. Oil and wax are the only things that make vinyl fail early.

  2. 02

    Peel

    Burnish the transfer tape, then slowly peel the backing away. The overlay stays on the tape.

  3. 03

    Place

    Line it up over the stock letters, set the center first, and press outward with a card or thumb.

  4. 04

    Reveal

    Peel the transfer tape back at a sharp angle. Give it a day before washing so the adhesive fully sets.

Questions

Quick answers.

Will it fit my bike?

It's made for the factory tank emblem on the CFMOTO 675SS, with a 0.015″ overcut on every edge so no silver peeks out. If you have a different model and want to know if it'll work, send a photo of your emblem to hello@derringtondynamics.com.

How long does it last?

It's permanent outdoor vinyl, rated for sun and rain. Clean prep is what makes it last, so don't skip the alcohol wipe.

Can I take it off later?

Yes. Warm it with a hair dryer and peel it slowly. Any leftover adhesive comes off with a little adhesive remover or isopropyl alcohol.

Shipping?

Kits ship flat in a padded mailer, pre-masked and ready to apply. Shipping cost and your address are handled at PayPal checkout.

Want a different color?

Custom colors are considered case by case. Email the color you want.

Back to the kit

Derrington Dynamics is an independent aftermarket maker and is not affiliated with or endorsed by CFMOTO. CFMOTO and 675SS are trademarks of their respective owner and are used here only to describe fitment.